MOC63u
UniBloc Moisture Analyzer


Excellent performance for a wide variety of applications in multiple industries

UniBloc Moisture Analyzer MOC63u

In many fields, a moisture analyzer is a necessary tool for quality control requirements. With the MOC63u, you can easily obtain accurate data. Simply place material on the pan and shut the cover. The MOC63u will start to measure. The MOC63u adapts to various materials and increases your work efficiency.

Features

Halogen heater

Long-life halogen heater provides quick and accurate measurement. The temperature can be changed from 50 degrees to 200 degree Celsius.

Large pan size: 95mm dia

Adapts to various materials.

Built-in USB port

UniBloc technology

If you are connecting to the PC by USB, you will need the USB driver. Please download the driver here.

Easy operation using a simple keypad

Features easy-to-operate software and keypad layout. In addition, an automatic starting mode saves measurement time, increasing your work efficiency. Operation simply requires 'putting material on the pan and shutting the cover'. Internal memory can save 10 measurement conditions and 100 results. Various measurement modes provide extra support.

Many measurement modes

Ending modes:

Automatic ending mode

Automatic ending mode

Automatically ends measurement when moisture loss over the previous 30 seconds becomes smaller than specified percentage.

Timed ending mode

Timed ending mode

Automatically ends measurement when the specified amount of time has elapsed.

Alternative drying modes

Rapid drying mode

Rapid drying mode

First dries with the highest temperature for the specified period, then shifts to the specified temperature, shortening measurement time.

Slow drying mode

Slow drying mode

Gently heats samples that might solidify at the surface or samples that reduce under high temperature.

Step drying mode

Step drying mode

Allows step-by-step change in drying conditions. This feature is useful when measuring samples that contain a large amount of water.

Starting mode

Automatic starting mode

Starts measurement immediately after closing the lid. It saves time in repeat measurements.

WindowsDirect

Send balance data to Excel or other Windows applications without installing additional data communication software. By combining standard Auto print functions with typical spreadsheet functions, even difficult applications can be easily automated.

* RS-232C or USB cable interface is needed.

You can create graphs easily with WindowsDirect and Excel.
If you need templates, please download from here.


Specifications

Capacity 60g
0.02g
Minimum readability 0.001g
0.01/0.1% (Selectable)
Repeatability 0.15% (2g)
0.05% (5g)
0.02% (10g)
Drying Heater Straight type halogen heater
Power 400W
Temperature range 50-200°C (1°C increments)
Setting (There is a time restriction when exceeding 180°C.)
Display LCD with backlight
Pan size 95mm dia
Dimension (W×D×H) mm 202 × 336 × 157
Weight 4kg
Operational temperature and humidity range 5 to 40°C, 85%RH or lower
Measurement modes Standard
(Easy start/Automatic end/Timed end)
Rapid drying
(Easy start/Automatic end/Timed end)
Slow drying
(Easy start/Automatic end/Timed end)
Step drying
(Easy start/Automatic end/Timed end)
Timer setting 1-120 minutes or continuous
(max 12 hours)
Interface RS-232C (9-pin connector) I/O port
USB port
Measurement conditions data memory 10
Data memory 100

Optional accessories

Optional accessories Printer EP-80
Printer EP-90
In-use protection cover for display (5 pieces)
Aluminum sheet
Fiberglass sheet
Temperature calibration kit
Sample pan (SUS)
RS-232C cable
USB connection cable
Halogen heater for replacement

For Research Use Only. Not for use in diagnostic procedures.