System GC
Custom Gas Chromatography Program for Complete GC Solutions


System GC

Features

  • Fully applicated GC Systems based on industry-standard methods
  • Utilizing the GC-2010 Plus and GC-2014 platforms
  • Factory built and tested

Product Description

GC Systems to Meet Your Application Needs

Shimadzu began building Gas Chromatography products in 1955 and remains committed to building the best GC products in the world. Throughout our long history, the customer's needs have always been central to all our design, manufacturing, and testing processes.

As part of this continuing commitment, we developed the System GC program, which provides our customers with the best applicated and fully configured GC products available anywhere. Configured and tested in Shimadzu's System Integration Technology Lab, each system is shipped with proof of performance, QA/QC and a field test standard.

We fully recognize the need for after-sales support, and our state-of-the-art training facility houses 6 labs and classrooms to accommodate up to 6 classes simultaneously. Course development is based on both theoretical and practical applications, and highly qualified instructors provide hands-on training to customers in the operation and maintenance of their Shimadzu instruments.

Upholding the Shimadzu tradition, the System GC group is uncompromising in the quest for excellence and in optimizing separations and making the products easy to use. Expect performance, quality and value with the System GC program!

Sample System GC Configurations

Greenhouse and Atmospheric Gas Analyzer

This GC-2014 based system quantifies N2O, CO2 and CH4 in atmospheric air. This system will also separate and provide quantitative information for N2, O2 and CO. It contains two ten port, one six port and one four port valve. It uses an ECD, TCD, methanizer and FID to detect the list of gases. Detection levels range from 100ppb for N2O to mid % levels for atmospheric N2 and O2. Data station and software sold separately. GCsolution is the recommended chromatography software data package. The run time can be extended to include ethane, othylene and acetylene in the analysis.

Compounds:
N2O, CH4, CO2, O2, N2, CO

Detection Limits:
N2O: 100ppb, CO2: 10ppm(FID), CH4: 0.1ppm



Natural Gas Analysis System by GPA Method 2261

This GC-2014 based Gas Chromatographic system is constructed according to The Gas Processors Association method 2261. The sample is introduced by filling a sample loop and injection occurs when the valve actuates. C6+ components are grouped into a single peak using a pre-cut column which is backflushed to elute the hexanes and heavier as the first peak. Nitrogen/air, methane, carbon dioxide, and ethane through n-pentane elute on a forward flow of carrier gas through the partition column. H2S is not determined. The chromatography software outputs a mole% report. A post-run program calculates BTU per cubic foot, BTU per pound and gasoline content as per the GPA 2172 method. Run time is approximately 17 minutes.

Compounds:
Air/Nitrogen, Methane, CO2, Ethane, Propane, I-Butane, N-Butane, Neo-Pentane, I-Pentane, N-Pentane and Hexanes+ by backflush

Detection Limits:
The lowest level of quantification for the permanent gases by TCD with Helium carrier is 50ppm (O2, N2, CO and CO2). The hydrocarbons by TCD with Helium carrier will be 50ppm.



Simulated Distillation by Gas Chromatography

This GC-2010 based system is designed with the appropriate hardware and software to perform the following simulated distillation ASTM methods: ASTM-D2887, ASTM-D3710, ASTM-D5307, and ASTM-D6352. The package includes an enhanced data station, column, C6 to C44 alkane standard, GCsolution software and SimDist GC software. Cryogenic cooling (221-49588-92) may be required for light hydrocarbon gasoline range fractionation by D2887 and is sold separately. Autosampler sold separately.

Methods:
ASTM-D2887, ASTM-D3710, ASTM-D5307 and ASTM-D6352

Hardware:
GC-2014 TCD, two 1/16th inch valves with micro-electric actuation



TOGAS ASTM-D3612 Method B

The GC-2014 based Transformer Oil Gas Analysis System is our third-generation system built specifically to run ASTM-D3612 section B. The GC-2014A TOGAS gives accurate measurement of dissolved gases which include H2, O2, N2, CH4, CO, CO2, C2H6, C2H4, and C2H2 in mineral spirit-based transformer oil via direct injection and oil stripper extraction. Meets ASTM-D3612-98 section B requirements. Features a GC-2014A with FID and TCD detectors, valves, columns, methanizer, and oil stripper. System operation is completely automated. Analysis time is approximately 25 minutes. Must include a data processor or data station.

Methods:
ASTM-D3612 Method B

Hardware:
GC-2014 FID/TCD, one 10 port valve and 0ne 4 port valve, methanizer.

For Research Use Only. Not for use in diagnostic procedures.