Recent Publications - Additive Manufacturing (3D Printing)

Return to Additive Manufacturing (3D Printing) Top Page 

Featured Scientific Journals & Papers

Influence of Infill Density on the Mechanical Properties of 3D Printed Polylactid Acid Parts

Ali Can Kaya Mechatronics Engineering Department, Turkish-German University ORCID: 0000-0003-2856-5508

Related Products: Universal/Tensile Test Frames

Read/Download 

 

Microstructure and property evaluation of TA15 titanium alloy fabricated by selective laser melting after heat treatment

Shuai Huang, Bingbing Sun, Shaoqing Guo, Microstructure and property evaluation of TA15 titanium alloy fabricated by selective laser melting after heat treatment, Optics & Laser Technology, Volume 144, 2021, 107422, ISSN 0030-3992, https://doi.org/10.1016/j.optlastec.2021.107422.

Related Products: Universal/Tensile Test Frames

Read/Download 

 

Effective Toughness of Heterogeneous Materials with Rate-Dependent Fracture Energy

Albertini, Gabriele; Lebihain, Mathias; Hild, François; Ponson, Laurent; Kammer, David – Physical review Letters, 2021

Read/Download 

 

Synthesis and Characterization of Graphene based Acrylonitrile Butadiene Styrene Nanocomposite Using Fused Deposition Method

Shinde, Dattaji & Kulkarni, Sachin & Bohara, Aliasgar. (2018). Synthesis and Characterization of Graphene based Acrylonitrile Butadiene Styrene Nanocomposite Using Fused Deposition Method.

Read/Download 

 

The Fiber Optic Reel System: A Compact Deployment Solution for Tethered Live-Telemetry Deep-Sea Robots and Sensors

Phillips, B.T.; Chaloux, N.; Shomberg, R.; Muñoz-Soto, A.; Owens, J. The Fiber Optic Reel System: A Compact Deployment Solution for Tethered Live-Telemetry Deep-Sea Robots and Sensors. Sensors 202121, 2526. https://doi.org/10.3390/s21072526

Read/Download 

 

3D Printed Clamps for In Vitro Tensile Tests of Human Gracilis and the Superficial Third of Quadriceps Tendons

Grgić, I.; Wertheimer, V.; Karakašić, M.; Ivandić, Ž. 3D Printed Clamps for In Vitro Tensile Tests of Human Gracilis and the Superficial Third of Quadriceps Tendons. Appl. Sci. 202111, 2563. https://doi.org/10.3390/app11062563

Read/Download 

 

Impact of Aging Effect and Heat Treatment on the Tensile Properties of PLA (Poly Lactic Acid) Printed Parts

Hasan, Mohammad Sakib & Ivanov, Toni & Vorkapić, Miloš & Simonovic, Aleksandar & Daou, David & Kovacevic, Aleksandar & Milovanović, Aleksa. (2020). Impact of Aging Effect and Heat Treatment on the Tensile Properties of PLA (Poly Lactic Acid) Printed Parts. MATERIALE PLASTICE. 57. 147-159. 10.37358/MP.20.3.5389. 

Read/Download 

 

Dimensional Accuracy and Experimental Investigation on Tensile Behavior of Various 3D Printed Materials

Proceedings of OTEH 2020 9th International Conference, Dimensional Accuracy and Experimental Investigation on Tensile Behavior of Various 3D Printed Materials. Mohammad Sakib Hasan, Toni Ivanov, Dragoljub Tanović, Aleksandar Simonović, Miloš Vorkapić. http://www.vti.mod.gov.rs/oteh/elementi/rad/055.pdf

Read/Download 

 

Strength Comparison of FDM 3D Printed PLA Made by Different Manufacturers

TEM Journal – Volume 9 / Number 3 / 2020. 969
TEM Journal. Volume 9, Issue 3, Pages 966-970, ISSN 2217-8309, DOI: 10.18421/TEM93-18, August 2020.

Read/Download 

 

3D Digital Manufacturing via Synchronous 5-Axes Printing for Strengthening Printing Parts

R. C. Luo, L. C. Hsu, T. J. Hsiao and Y. W. Perng, "3D Digital Manufacturing via Synchronous 5-Axes Printing for Strengthening Printing Parts," in IEEE Access, vol. 8, pp. 126083-126091, 2020, doi: 10.1109/ACCESS.2020.3007772.

Read/Download 

 

Spherical particles with and without attached nanoparticles formed by DC-arc spheroidization of irregularly shaped stainless-steel powder

H. Itagaki et al 2020 Jpn. J. Appl. Phys. 59 SJJG01

Read/Download 

 

Polymer Matrix Nanocomposites for 3D Printing

Cadete M.S., Gomes T.E.P., Costa A., Fonseca M., Dias-de-Oliveira J., Neto V. (2020) Polymer Matrix Nanocomposites for 3D Printing. In: Almeida H., Vasco J. (eds) Progress in Digital and Physical Manufacturing. ProDPM 2019. Lecture Notes in Mechanical Engineering. Springer, Cham

Read/Download 

 

3D printing of porous Si2N2O ceramics based on strengthened green bodies fabricated via strong colloidal gel

Materials & Design
Volume 185, 5 January 2020, 108220

Read/Download 

 

Highly Sensitive and Wearable Liquid Metal‐Based Pressure Sensor for Health Monitoring Applications: Integration of a 3D‐Printed Microbump Array with the Microchannel

ADVANCED HEALTHCARE MATERIALS
Volume 8, Issue 22
November 21, 2019

Read/Download 

 

Study of Laser Metal Deposition (LMD) as a Manufacturing Technique in Automotive Industry

Ramalho F.Q., Alves M.L., Correia M.S., Vilhena L.M., Ramalho A. (2020) Study of Laser Metal Deposition (LMD) as a Manufacturing Technique in Automotive Industry. In: Almeida H., Vasco J. (eds) Progress in Digital and Physical Manufacturing. ProDPM 2019. Lecture Notes in Mechanical Engineering. Springer, Cham

 

Read/Download 

Industries

For Research Use Only. Not for use in diagnostic procedures.

Top of This Page