JF Series - Compact Hydraulic Actuator Force Simulator
For Testing the Endurance of Various Parts and Components
The JF Series Force Simulator was developed with the emphasis on light weight, compact size and ease-of-use as a general-purpose, compact jack for the Servopulser system. Testing systems installed with the Force Simulator can easily perform endurance, fatigue and simulation tests on small structural members and various other structural members, which helps improve the logical design and reliability of products.
|Model Stroke||±50 mm||±100 mm||±150 mm|
|JF5KN||Weight||17 kg||20 kg||26 kg|
|Overall length||565 mm||815 mm||1065 mm|
|Weight||21 kg||25 kg||28 kg|
|Overall length||570 mm||820 mm||1070 mm|
|JF30kN||Weight||74 kg||84 kg||94 kg|
|Overall length||715 mm||965 mm||1215 mm|
*1: The weight includes the load cell and servo valve.
*2: The overall length is the dimension at the central position, with the load cell attached.
System Configuration Example
Standard System Configuration and Main Specifications
|Actuator||Dynamic test force||±5 kN||±10 kN||±20 kN||±30 kN|
|Static test force||Approx. ±7 kN||Approx. ±13 kN||Approx. ±27 kN||Approx. ±39 kN|
|Effective stroke ±mm)||Select 50, 100 or 150|
|Servo valve||Rated pressure||21 MPa|
|Flowrate||19 L/min (when pressure drops by 7 MPa)|
|Hydraulic power supply unit||Model||AF-10B|
|Rated pressure||21 MPa|
|Pumping rate||9 L/min/50 Hz, 11 L/min/60 Hz|
|Other||Motor: 5.5 kW, 4-pole (drip-proof) / Constant-rate gear pump tank capacity: 90 L/ACC1L installed / Cooling method: air cooled / With casters|
|Pipes||High-pressure rubber hose||5 m, 1/2 inch with coupling at each end, including spiral-wire guard||3/4 inch|
|Utilities||Power supply||200/220 V ±10 %, 8 kVA, 3-phase and 100 V ±10 %, 300 VA, single-phase|
Other combinations of hydraulic power supply, controller, etc. also are available. Consult your Shimadzu representative for details.