Shimadzu i-Series Driver for Multi-Vendor Software

Supported devices

       
Unit Model Name Remarks
i-Series LC-2030 These instruments work with Agilent, Thermo Fisher and Waters software
LC-2030C
LC-2030C LT
LC-2030C 3D
LC-2040C
LC-2040C LT
LC-2040C MT
LC-2040C 3D
LC-2040C 3D MT
i-Series Plus LC-2030+
These instruments are supported only by the software listed below.
  • Waters Empower 2
  • Waters Empower 3
LC-2030C+
LC-2030C LT+
LC-2030C 3D+
LC-2040C+
LC-2040C LT+
LC-2040C MT+
LC-2040C 3D+
LC-2040C 3D MT+
External Detector RF-20A, RF-20AXS These instruments work with Agilent, Thermo Fisher and Waters software
RID-20A These instruments work with Agilent, Thermo Fisher and Waters software
AD Input Board These instruments work with Agilent, Thermo Fisher and Waters software
Mobile Phase Flow Line Switching Valve FCV-11AL, FCV-11ALS These instruments work with Agilent, Thermo Fisher and Waters software
High-Pressure Flow-Line Switching Valve FCV-14AH, FCV-34AH These instruments work with Agilent, Thermo Fisher and Waters software
  • * The corresponding ROM version of the instruments varies depending on the software. If you want to confirm, please contact our support department.
  • * If you want to use the i-Series Plus model with the unsupported software, please contact your local sales person. It can be used as a i-Series model.
  • * If you are using Chromeleon 7.2, up to two i-Series systems can be controlled per computer as a license.
  • * Four systems maximum with no PDA or four systems with a single PDA or two systems with two PDA detectors (per LAC/E32).
  • * It is not recommended to connect other vendor instruments to the same acquisition server.
  • * Waters® and Empower® are registered trademarks of Waters in the USA and other countries
  • * ChromeleonTM is a registered trademark of Thermo Fisher Scientific Inc.
i-Series HPLC

For Research Use Only. Not for use in diagnostic procedures.

Top of This Page