SPM-Nanoa Scanning Probe / Atomic Force Microscope

Wide Assortment of Expansion Functionality

SPM System Component Diagram
Scanner Max. scanning size (X,Y,Z)
10 μm x 10 μm x 1 μm (standard)
30 μm x 30 μm x 5 μm (optional)
125 μm x 125 μm x 7 μm (optional)
55 μm x 55 μm x 13 μm (optional)
2.5 μm x 2.5 μm x 0.3 μm (optional)
Sample Stage Max. sample size
ø50 mm x 8 mm
For 50 mm diameter samples, only the central area can be observed

Max. stroke
±5 mm
When a 40 mm diameter or smaller sample is placed in the center of the scanner
Optical Microscope Observation Total magnification rate
About 220 to 1300 times
(when maximum displayed on 21.5-inch monitor)
 

Installation Specifications

SPM System Installation Example

 
 
[Installation Environment] Temperature 23 °C ± 5 °C
[Installation Environment] Relative Humidity 60 % max. (with no condensation)
[Power Supply] Single Phase 100 to 240 V AC, 50/60 Hz, 15 A, one circuit
[Power Supply] Ground Type-D ground (Grounding Resistance: 100 max.)
[Size and Weight of Units] Microscope Unit W220 × D370 × H520mm 24kg
[Size and Weight of Units] Control Unit W190 × D400 × H440mm 14kg

For Research Use Only. Not for use in diagnostic procedures.

Top of This Page