10 N Screw Flat Grips

10 N Screw Flat Grips

10 N (2.2 lbf) screw flat grips are primarily used for tensile testing low- force, soft materials such as yarn, paper, plastics, and cloth. Grip faces are flat and rubber-coated to secure materials and protect delicate samples. A notch in the upper grip helps center samples for optimal sample placement and an S-shaped universal joint ensures alignment with the loading axis. Pair these grips with a 10N to 50N load cell for optimal fitment and results.

These grips are supplied with a coupling that connects with AGX-V series 5 kN (1,100 lbf) and lower-capacity load cells. Additional load cell coupling parts are required for the AGS-X and EZ-X series and are listed as accessories.

 

Relevant Materials

Yarn, Paper, Plastics, Cloth

 

Relevant Specimens

Plates, Films, Wires, Threads, Filaments

Operation

Samples are threaded through the notch in the upper grip and tightened in the center of the grip face. Knurled knobs on both the upper and lower grips are finger tightened to clamp specimens within the grip faces. Samples are placed between the bottom grip, aligned with the centering mark and clamped in place to prepare for testing.

Specifications

Maximum Grip Capacity Applicable Specimen Thickness Grip Face Size Temperature Range Grip Size Upper Grip Mass Upper Fitting *2
Lower
Ø Fitting
(Ø pin)
Width Length Width
Length
Upper / Lower *1
N kgf lbf mm (in) mm (in) mm (in) °C (°F) mm (in) mm (in) kg (lb) mm mm
10 1.0 2.2 0 to 3
(0 to 0.12)
16
(0.63)
15
(0.59)
-10 to 60
(14 to 140)
16
(0.63)
100 / 145
(3.9 / 5.7)
0.083
(0.18) 
M12 screw, 1.5 pitch 16
(6.5)
 

Note 1: The upper grip length includes the length of the S-shaped universal joint.
Note 2: The load cell coupling is applicable to 5 kN or lower AGX-V load cells. Additional coupling joints are required when these grips are used with AGS-X series and EZ-X series load cells.

 

Dimensions of 10 N Screw Flat Grips

 

Ordering Information

Part Number Description
344-13427-10

10 N Screw Flat Grip Set
Includes: upper and lower grips with flat rubber-coated grip faces, an S-shaped upper joint, and a load cell coupling for AGX-V series 5 kN and lower capacity load cells

  Accessories
022-60295-31
Load cell coupling for AGS-X series load cells between 10 N and 100 N capacity and EZ-X series load cells between 10 N and 500 N capacity
343-38279-05 Load cell coupling for AGS-X series 500 N capacity load cells

For Research Use Only. Not for use in diagnostic procedures.

Top of This Page