Recent Publications - Plastics, Polymers, and Rubber Materials Testing

Ageing of climbing ropes with and without hydrophobic coating New!

Sedláček D, Roso M, Viel L, et al. Ageing of climbing ropes with and without hydrophobic coating. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology. December 2021. doi:10.1177/17543371211062816

Related Products: Universal/Tensile Test Frames

Mathematical Modelling of Forming Processes in the Conditions of Uniaxial Compaction of Powder Wax-Like Materials

Sergey G. Zhilina, Oleg N. Komarova, Nina A. Bogdanovaa, Oleg S. Amosovb a Institute of Mechanical Engineering and Metallurgy, Far East Branch of the Russian Academy of Sciences, Komsomolsk-on-Amur, Russian Federation b Laboratory of Intellectual Control Systems and Modelling, V.A. Trapeznikov Institute of Control Sciences of Russian Academy of Sciences, Moscow

Related Products: Universal/Tensile Test Frames (Compression Testing), DTG-60 Thermal Analyzers

Tri-branched gels: Low branching factors make rubbery materials ultra-elastic

Takeshi Fujiyabu , Naoyuki Sakumichi , Takuya Katashima , Chang Liu , Koichi Mayumi , Ung-il Chung , Takamasa Sakai. Department of Bioengineering, Graduate School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, Japan. Material Innovation Research Center (MIRC) and Department of Advanced Materials Science, Graduate School of Frontier Sciences, The University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8561, Japan.

Simple and Reliable Fabrication Method for Polydimethylsiloxane Dielectric Elastomer Actuators Using Carbon Nanotube Powder Electrodes

Ardi Wiranata, Yasuyuki Ishii, Naoki Hosoya, Shingo Maeda Adv. Eng. Mater. 2021, 2001181

Investigation of the 2D assumption in the image-based inertial impact test

Van Blitterswyk, J, Fletcher, L, Pierron, F. Investigation of the 2D assumption in the image‐based inertial impact test. Strain. 2021; 57:e12369. https://doi.org/10.1111/str.12369

Influence of bonded area size on cracking in reacted NiAl layer for crack-free reactive soldering

Kana Maekawa et al 2020 Jpn. J. Appl. Phys. 59 SIIL01

Hypervelocity Impact Response of Polyethylene Plates

Jacob Rogers, Paul T. Mead, Khari Harrison, Kalyan Raj Kota, James D. Leaverton, Gavin Lukasik, Waruna D. Kulatilaka, Justin W. Wilkerson, Thomas E. Lacy, Published Online:4 Jan 2021, https://doi.org/10.2514/6.2021-0887

High‐toughness, environment‐friendly solid epoxy resins: Preparation, mechanical performance, curing behavior, and thermal properties

J. Appl. Polym. Sci. 2019, 137, 48596.

Synthesis, Characterization, and 3D Printing of an Isosorbide-Based, Light-Curable, Degradable Polymer for Potential Application in Maxillofacial Reconstruction

ACS Biomater. Sci. Eng.

Wetting and localization of compatibilizers in biocomposites: A nanoscale evaluation and effects on physical properties

Polymer
Available online 4 November 2019, 121963