Shimadzu Instrument Startup and Shutdown Procedures
Access the resources below to ensure proper shutdown and start-up of your analytical instruments.
For additional information or help, please contact your local Shimadzu representative here.
Elemental Analysis
AA - Preparing your instrument for startup and shutdown
ICP - Preparing your instrument for startup and shutdown
ICPMS - Preparing your instrument for shutdown and startup
Gas Chromatography
Preparing your Shimadzu Gas Chromatograph for Startup and Shutdown
Gas Chromatography/Mass Spectrometry (GC-MS)
Preparing your Shimadzu GC-MS or GC-MSMS for Startup and Shutdown
Liquid Chromatography
Good Practices Recommended for Shutting Down HPLC Systems
Liquid Chromatography / Mass Spectrometry (LC-MS)
Extended Storage of LC/MS and LC/MS/MS Under Vacuum
Manual Vacuum Start-up and Shutdown Procedures for Triple Quad LCMS
Manual Vacuum Procedure for QTOF LCMS
Molecular Spectroscopy
Start up: To start up your instrument, power it on using the power switch/button on the instrument, and then open the operating software. Once connected to the software, the instrument will begin the initialization procedure (less than one minute to a few minutes depending on the instrument). Once completed, it will be ready to operate.
Shut down: If the instrument (UV-Vis, FTIR and Fluorescence) is not going to be used for an extended period, please, close the software and turn off the power switch. This will help in preserving the life of their lamps.