Recent Publications - Additive Manufacturing (3D Printing)

Nano-additive manufacturing of multilevel strengthened aluminum matrix composites    New!

Chenwei Shao, Haoyang Li, Yankun Zhu, Peng Li, Haoyang Yu, Zhefeng Zhang3Herbert Gleiter, André McDonald and James Hogan Accepted Manuscript online 19 October 2022 © 2022 The Author(s). Published by IOP Publishing Ltd on behalf of the IMMT

Related Products: High-Speed Video Camera

Influence of Different Alloying Strategies on the Mechanical Behavior of Tool Steel Produced by Laser-Powder Bed Fusion

Baqerzadeh Chehreh, A.; Strauch, A.; Großwendt, F.; Röttger, A.; Fechte-Heinen, R.; Theisen, W.; Walther, F. Influence of Different Alloying Strategies on the Mechanical Behavior of Tool Steel Produced by Laser-Powder Bed Fusion. Materials 2021, 14, 3344. https://doi.org/10.3390/ma14123344

Related Products: Particle Size Analysis

Influence of Infill Density on the Mechanical Properties of 3D Printed Polylactid Acid Parts

Ali Can Kaya Mechatronics Engineering Department, Turkish-German University ORCID: 0000-0003-2856-5508

Related Products: Universal/Tensile Test Frames

Microstructure and property evaluation of TA15 titanium alloy fabricated by selective laser melting after heat treatment

Shuai Huang, Bingbing Sun, Shaoqing Guo, Microstructure and property evaluation of TA15 titanium alloy fabricated by selective laser melting after heat treatment, Optics & Laser Technology, Volume 144, 2021, 107422, ISSN 0030-3992, https://doi.org/10.1016/j.optlastec.2021.107422.

Related Products: Universal/Tensile Test Frames

Effective Toughness of Heterogeneous Materials with Rate-Dependent Fracture Energy

Albertini, Gabriele; Lebihain, Mathias; Hild, François; Ponson, Laurent; Kammer, David – Physical review Letters, 2021

Synthesis and Characterization of Graphene based Acrylonitrile Butadiene Styrene Nanocomposite Using Fused Deposition Method

Shinde, Dattaji & Kulkarni, Sachin & Bohara, Aliasgar. (2018). Synthesis and Characterization of Graphene based Acrylonitrile Butadiene Styrene Nanocomposite Using Fused Deposition Method.

The Fiber Optic Reel System: A Compact Deployment Solution for Tethered Live-Telemetry Deep-Sea Robots and Sensors

Phillips, B.T.; Chaloux, N.; Shomberg, R.; Muñoz-Soto, A.; Owens, J. The Fiber Optic Reel System: A Compact Deployment Solution for Tethered Live-Telemetry Deep-Sea Robots and Sensors. Sensors 2021, 21, 2526. https://doi.org/10.3390/s21072526

3D Printed Clamps for In Vitro Tensile Tests of Human Gracilis and the Superficial Third of Quadriceps Tendons

Grgić, I.; Wertheimer, V.; Karakašić, M.; Ivandić, Ž. 3D Printed Clamps for In Vitro Tensile Tests of Human Gracilis and the Superficial Third of Quadriceps Tendons. Appl. Sci. 2021, 11, 2563. https://doi.org/10.3390/app11062563

Impact of Aging Effect and Heat Treatment on the Tensile Properties of PLA (Poly Lactic Acid) Printed Parts

Hasan, Mohammad Sakib & Ivanov, Toni & Vorkapić, Miloš & Simonovic, Aleksandar & Daou, David & Kovacevic, Aleksandar & Milovanović, Aleksa. (2020). Impact of Aging Effect and Heat Treatment on the Tensile Properties of PLA (Poly Lactic Acid) Printed Parts. MATERIALE PLASTICE. 57. 147-159. 10.37358/MP.20.3.5389.

Dimensional Accuracy and Experimental Investigation on Tensile Behavior of Various 3D Printed Materials

Proceedings of OTEH 2020 9th International Conference, Dimensional Accuracy and Experimental Investigation on Tensile Behavior of Various 3D Printed Materials. Mohammad Sakib Hasan, Toni Ivanov, Dragoljub Tanović, Aleksandar Simonović, Miloš Vorkapić. http://www.vti.mod.gov.rs/oteh/elementi/rad/055.pdf

Strength Comparison of FDM 3D Printed PLA Made by Different Manufacturers

TEM Journal – Volume 9 / Number 3 / 2020. 969
TEM Journal. Volume 9, Issue 3, Pages 966-970, ISSN 2217-8309, DOI: 10.18421/TEM93-18, August 2020.

3D Digital Manufacturing via Synchronous 5-Axes Printing for Strengthening Printing Parts

R. C. Luo, L. C. Hsu, T. J. Hsiao and Y. W. Perng, "3D Digital Manufacturing via Synchronous 5-Axes Printing for Strengthening Printing Parts," in IEEE Access, vol. 8, pp. 126083-126091, 2020, doi: 10.1109/ACCESS.2020.3007772.

Spherical particles with and without attached nanoparticles formed by DC-arc spheroidization of irregularly shaped stainless-steel powder

H. Itagaki et al 2020 Jpn. J. Appl. Phys. 59 SJJG01

Polymer Matrix Nanocomposites for 3D Printing

Cadete M.S., Gomes T.E.P., Costa A., Fonseca M., Dias-de-Oliveira J., Neto V. (2020) Polymer Matrix Nanocomposites for 3D Printing. In: Almeida H., Vasco J. (eds) Progress in Digital and Physical Manufacturing. ProDPM 2019. Lecture Notes in Mechanical Engineering. Springer, Cham

3D printing of porous Si2N2O ceramics based on strengthened green bodies fabricated via strong colloidal gel

Materials & Design
Volume 185, 5 January 2020, 108220

Highly Sensitive and Wearable Liquid Metal‐Based Pressure Sensor for Health Monitoring Applications: Integration of a 3D‐Printed Microbump Array with the Microchannel

ADVANCED HEALTHCARE MATERIALS
Volume 8, Issue 22
November 21, 2019

Study of Laser Metal Deposition (LMD) as a Manufacturing Technique in Automotive Industry

Ramalho F.Q., Alves M.L., Correia M.S., Vilhena L.M., Ramalho A. (2020) Study of Laser Metal Deposition (LMD) as a Manufacturing Technique in Automotive Industry. In: Almeida H., Vasco J. (eds) Progress in Digital and Physical Manufacturing. ProDPM 2019. Lecture Notes in Mechanical Engineering. Springer, Cham