Long Optical Path Measurement

 

Spectrum of Potassium Permanganate

When the concentration of the sample is too low to be measured using a standard cell with an optical path length of 10 mm, a cell with a longer optical path length is used to enable measurement at the optimum absorption sensitivity. As shown in the figure, the absorption spectrum of potassium permanganate becomes clearer when a 100 mm cell is used instead of a 10 mm cell.

Square Long-Path Absorption Cell Holder

Square Long-Path Absorption Cell Holder

This holder holds 10, 20, 30, 50, 70, and 100 mm square cells.

  • For UVmini series, UV-1800/2450/2550/2600/2700/3600 and SolidSpec
 
 

Universal Rectangular Cell Holder, Four-Cell Type

Holds four rectangular cells with an optical path length of 10, 20, 30, 50, 70, or 100 mm.

Note: The Four-Cell Sample Compartment Unit (P/N 206-23670-91) is required. When a rectangular, long-path cell is used on the reference side, its holder (P/N 204-28720) is required.

 

Reference-Side Rectangular Long-Path Absorption Cell Holder

Reference-Side Rectangular Long-Path Absorption Cell Holder

If using a 4-cell-type universal rectangular cell holder, use this as a reference-side cell holder if necessary.

 

Long-Path Rectangular Cell Holder

Long-Path Rectangular Cell Holder

Holds two rectangular cells with an optical path length of 10, 20, 30, 50, 70, or 100 mm

 

Cylindrical Cell Holder

Cylindrical Cell Holder

Holds two cylindrical cells with an optical path length of 10, 20, 50, or 100 mm.

 

For Research Use Only. Not for use in diagnostic procedures.

Top of This Page