AP Series Balance

Fast, Efficient Performance for Enhanced Productivity

Ap Series Balance with Component Descriptions

The AP Series of analytical balances encompasses the APW, APW-D, APX, and APY models, and incorporate innovative features and accessories, as well as Shimadzu’s most advanced one-piece UniBloc weighing sensor.

Specifications

APW and APW-D Model Analytical Balances

Model AP135W AP125WD AP225WD AP124W AP224W AP324W
Capacity 135 g 120 g/52 g 220 g/102 g 120 g 220 g 320 g
Minimum display 0.01 mg 0.01 mg/0.1 mg 0.1 mg
Calibration weight Built-in
External calibration weight for span calibration 45 to 135.009 g (100 g) 45 to 120.0090 g (100 g) 95 to 220.009 g (200 g) 45 to 120.009 g (100 g) 95 to 220.009 g (200 g) 95 to 320.009 g (300 g)
Repeatability
(standard deviation)
0.05 mg 0.1 mg/0.02 mg 0.1 mg/0.05 mg 0.1 mg 0.15 mg
Minimum weight1 30 mg 200 mg
Linearity ±0.1 mg ±0.2 mg/±0.05 mg ±0.2 mg/±0.1 mg ±0.2 mg ±0.3 mg
Response time for race measurements2 2 secs
Response time3 8 secs 2 secs/8 secs 2 secs
UniBloc weighing technology Included
Built-in calibration Included
Built-in clock Included
GLP/GMP/ISO calibration report Included
Mol conversion function Included
Sample (concentration) preparation Included
Inspection support function Included
Recipe formulation mode Included
Ionizer Optional
Operating temperature/humidity range4 5 to 40⁰C; 20 to 85% RH
Sensitivity stability against temperature range ±2 ppm/⁰C (10 to 30⁰C)
Pan size Dia. 91 mm
Body dimensions
W x D x H
Approx. 212 x 411 x 345 mm
(power supply unit included)
Approx. 212 x 367 x 345 mm
Weight Approx. 7.9 kg Approx. 7.0 kg
Display OEL display (dot matrix)
Input/output terminal RS232 (D-sub 9P plug); USB host (type A); USB device (type B); ionizer

APX and APY Model Analytical Balances

Model AP124X AP224X AP324X AP124Y AP224Y AP324Y
Capacity 120 g 220 g 320 g 120 g 220 g 320 g
Minimum display 0.1 mg
Calibration weight Built-in Not available
External calibration weight for span calibration 45 to 120.009 g (100 g) 95 to 220.009 g (200 g) 95 to 320.009 g (300 g) 45 to 120.009 g (100 g) 95 to 220.009 g (200 g) 95 to 320.009 g (300 g)
Repeatability
(standard deviation)
0.1 mg 0.15 mg 0.1 mg 0.15 mg
Minimum weight1 200 mg
Linearity ±0.2 mg ±0.3 mg ±0.2 mg ±0.3 mg
Response time for race measurements2 2 secs
Response time3 2 secs
UniBloc weighing technology Included
Built-in calibration Included Not available
Built-in clock Included
GLP/GMP/ISO calibration report Included
Mol conversion function Included Not available
Sample (concentration) preparation Included Not available
Inspection support function Included Not available
Recipe formulation mode Not available
Ionizer Optional Not available
Operating temperature/humidity range4 5 to 40⁰C; 20 to 85% RH
Sensitivity stability against temperature range ±2 ppm/⁰C (10 to 30⁰C)
Pan size Dia. 91 mm
Body dimensions
W x D x H
Approx. 212 x 367 x 345 mm
Weight Approx. 7.0 kg Approx. 6.5 kg
Display OEL display (dot matrix)
Input/output terminal RS232 (D-sub 9P plug); USB device (type B); ionizer RS232 (D-sub 9P plug); USB device (type B)

1) According to USPP chapter 41.
2) The response time for displaying 90% of added sample amount value in trace measurements (from 1 mg).
3) The response time value is typical.
4) Non-condensing.


Installation Space (unit: mm)

AP Series Balances Physical Dimensions

For Research Use Only. Not for use in diagnostic procedures.

Top of This Page